Blog

What Is Google UAC? Google App Campaigns Explained

Lakshith Dinesh

Lakshith Dinesh

Head of Growth, Linkrunner

Last updated on 7 min read

What Is Google UAC? Google App Campaigns Explained

Short answer: Google UAC (Universal App campaigns) is the old name for Google App campaigns, the Google Ads campaign type built to promote mobile apps. You give Google text, images, videos, a goal, a bid and a budget, and it builds the ads and serves them across Search, Google Play, YouTube, Discover and the Display Network. Results depend mostly on two choices you make: the conversion you ask Google to optimise for, and how you measure what happens after the install.

Search for "UAC" and most of what comes back assumes you already run one. This post is the step before that. It explains what the campaign type is, how it decides who sees your ads, what it needs from you, and what to expect in the first few weeks, all checked against Google's own Help Centre pages.

If you already have App campaigns live and want to tune them, skip to our Google UAC campaign checklist instead.

What is Google UAC?

Google UAC is the former name of Google App campaigns: a single, automated Google Ads campaign type that promotes an app across Google's properties from one set of assets, one bid and one budget.

  • The rename: Google shortened "Universal App campaigns" to "App campaigns" in February 2019. Marketers and agencies still say "UAC", so both names point to the same thing.
  • What is automated: targeting, bidding per auction and ad assembly. There are no keywords to buy and no placements to pick one by one.
  • What stays with you: the goal, the bid strategy, the budget, the conversion event and the creative.

The three subtypes, per Google's App campaigns overview:

SubtypeShort nameWhat it is for
App campaigns for installsACiGrowing the user base with new installs
App campaigns for engagementACeBringing existing users back to take an in-app action
App campaigns for pre-registrationACPreCollecting sign-ups on Google Play before launch

Where do App campaign ads run?

App campaign ads can appear on Google Search and search partners, Google Play, YouTube, Discover and the Google Display Network, and Google decides the mix.

Google's overview lists these placements:

  • Google Search and search partners
  • Google Play: search results and related-app sections
  • YouTube: on relevant pages and content
  • Discover on Google Search
  • Google Display Network: including Gmail, other apps and mobile sites of news and blog publishers

You cannot switch a network on or off inside the campaign. Google shifts budget towards whichever placement is finding the conversions you asked for, which is why the quality of that conversion signal matters so much.

What assets does an App campaign need?

You supply text, images, videos and HTML5 files; Google tests combinations and serves the best performers, pulling extra material from your store listing.

Limits per ad group, from Google's asset types page for App campaigns:

  • Headlines: up to 5, each 30 characters or fewer
  • Descriptions: up to 5, each 90 characters or fewer
  • Images: JPG or PNG under 5MB, in 1:1, 1.91:1 and 4:5 ratios
  • Videos: hosted on YouTube, landscape, portrait or square
  • HTML5: ZIP files up to 5MB, up to 20 per ad group

If you add no video, Google says it may make one for you from your campaign assets and store listing. That is usually a reason to supply your own. How to fill and rotate these slots well is covered in the checklist, so we will not repeat it here.

How does Google UAC bid?

App campaigns bid in one of three ways: for install volume, for in-app actions, or for value (target ROAS), and each needs more measurement maturity than the one before.

From Google's page about bidding in App campaigns:

Bidding focusStrategiesWhat Google optimises forWhat it needs
InstallsTarget CPI, or Maximise conversionsThe most installs at, or within, your priceInstall tracking
In-app actionsTarget CPA, or Maximise conversionsUsers likely to complete a chosen eventThat event set up as a conversion in Google Ads or Firebase
ValueTarget ROAS, or Maximise conversion valueUsers likely to generate revenueThe Firebase SDK, events with a dynamic revenue value (Google Play codeless conversions also accepted on Android)
  • Target CPI is your average cost per install, not a hard cap. Google says daily results can sit above or below the target.
  • Target ROAS sets the value you want back as a percentage of spend. Google notes that a higher ROAS target narrows the pool of users it can reach, while a lower one helps the campaign scale.
  • The usual path: start on installs, move to in-app actions once an event has enough volume, then to value bidding once revenue data is steady. Our post on why smart bidding optimises the wrong users explains what goes wrong when teams stay on install bidding too long.

How do you choose the conversion to optimise for?

Pick the deepest in-app action that at least 10 different users complete every day in the campaign; that is Google's own bar for in-app action bidding.

The rule comes from Google's App campaigns best practices. Note the wording: 10 unique users, not 10 events.

  • Map the funnel first. List the in-app events between install and revenue: sign-up, first key action, trial start, first purchase.
  • Count unique users per day for each, per campaign rather than per app.
  • Choose the deepest event that clears 10 a day. If purchase is too rare, a trial start or first add-to-cart often is not.
  • Keep the list short. Every extra conversion competes for the algorithm's attention; see why tracking too many events hurts ad performance.

Budget follows the event. Google recommends a daily budget of at least 50 times target CPI for install campaigns and at least 10 times target CPA for in-app action campaigns. For example, a ₹40 target CPI implies at least ₹2k a day.

What happens in the learning phase?

After launch or a major change, App campaigns go through a learning phase while Google tests audiences, placements and asset combinations, and results swing more than usual.

What Google says, across its help pages:

  • Leave new campaigns alone early. The overview advises against cycling bids, changing the optimisation goal or making major location changes until a campaign reaches 100 conversions.
  • Major edits restart learning. Google's target ROAS guidance says big budget or target changes trigger a learning phase of 7 to 14 days.
  • Change slowly. The same page advises changing budgets or targets no more than once every 1 to 2 weeks, and within roughly 15 to 20% of historical averages.
  • Earn target ROAS. Start on Maximise conversions or target CPA and switch once you have, typically, 30 or more conversions in 30 days.

In practice: set the campaign up carefully, judge it on two weeks of data rather than two days, and make one change at a time.

How is Google UAC measured?

Google needs a measurement source to see installs and in-app events: either Google Analytics for Firebase, or a mobile measurement partner (MMP) that sends conversions to Google Ads.

Google's overview names both routes. The two set-ups look like this:

  • Firebase / GA4 route. The Firebase SDK logs events and you import them into Google Ads. It is the route Google calls the simplest for in-app conversions, and target ROAS requires the Firebase SDK.
  • MMP route. Your MMP attributes the install and passes conversions to Google through third-party app analytics. Google says this integration is replacing the old server-to-server connection that used postback URLs, and that imported conversion actions only report from the date you import them.
  • iOS. Google's best practices point iOS advertisers to SKAdNetwork, the ATT prompt and on-device conversion measurement.

Why many teams use an MMP even though Firebase works: Google is a self-attributing network. It grades its own results, with its own windows and modelled conversions. Once Meta or TikTok runs alongside Google, each network claims installs by its own rules, and only a neutral referee can de-duplicate them. Our guide to why self-attributing network numbers differ walks through the gap.

From Linkrunner's support work: when a customer's Linkrunner figures differ from Google's, the cause is usually a definition gap first (a 7-day versus 30-day window, cohort versus in-period counting, view-through), not a broken set-up. In one Google comparison, putting both on the same 30-day window shrank the gap to around 2 per cent. So align windows before you decide which number is wrong.

How to check this in your MMP

  • Match windows. Linkrunner defaults Google Ads to a 30-day click window, configurable from 1 to 30 days per channel.
  • Match events one for one. The conversion actions in Google Ads should mirror the events your MMP sends.
  • Compare cohort revenue, not just installs. Look at return on ad spend by campaign, from the same install cohort.

Linkrunner is a mobile attribution platform and a Google Partner; its Google Ads integration guide covers sending conversions back. Playo, a Linkrunner customer, cut its Google Ads CPI by 34% in three months, from roughly ₹20 to roughly ₹13 (Dec 2025 to Feb 2026). For what installs cost by category in India, see our first-party India CPI benchmarks.

UAC FAQ

Is Google UAC still available?

Yes, under a different name. Google renamed Universal App campaigns to App campaigns in February 2019, and the campaign type works the same way.

What is the difference between ACi and ACe?

ACi (App campaigns for installs) finds new users. ACe (App campaigns for engagement) brings people who already have the app back to complete an action, usually through deep links into the relevant screen.

Can I choose where my UAC ads appear?

Not channel by channel. Google spreads ads across Search, Play, YouTube, Discover and Display based on where it finds your conversion.

Do I need Firebase to run Google App campaigns?

No, for install and in-app action bidding: an MMP can send conversions through Google's third-party app analytics integration. Google says target ROAS bidding requires the Firebase SDK.

How long does the UAC learning phase last?

Google says major budget or target changes trigger a learning phase of 7 to 14 days. Avoid significant edits more than once every 1 to 2 weeks.

The takeaway

Google UAC is App campaigns: you set the goal, event, bid, budget and creative, and Google does the rest. The two inputs that matter most are a conversion event with enough daily users to learn from, and measurement you trust across every network, not only Google's.

Once your campaign is live, work through the 15-lever Google UAC checklist. To see Google installs and cohort revenue next to every other channel, request a demo from Linkrunner.

Start measuring the installs your team cares about

Bring attribution, deep links, SKAN, cohorts, and campaign intelligence into one workflow your growth team can trust.